Those houses have a rabbit as a corkscrew, you will see that over time, begins acting strangely, and instead of rotating the cork to do the opposite. This essentially means that it is no longer jump out of the caps, and instead will be pushed to breaking or bottle. If you have noticed this situation, you need to know how to fix the Rabbit corkscrew, and the next steps will help you in this.
Step 1: You have to see how the rabbit> Corkscrew work when placed on the wine bottle. His two side pins on the sides of the cylinder block, and then in the correct position under the handles so that the screw is allowed to be in the wrong direction
Wine Cork Screw
Step 2: the two pins identified, were you should focus the movement of the s "themed corkscrew. As soon as you press on them, would certainly put the pins on each side of the bottle then inside. If they are notSocket, which helps them to do so, it could be worse. This connector is a plastic circle that is inside.
Phase 3: Implementation of the model corkscrew rabbit should be covered, depending on the pin below. You have to take the covers off and evaluate the condition in which the outlets are. In most cases, they move around the outside of their territory, making it difficult for the screw to pull the cork.
Step 4: If this is the case, andthe upper bushings, then all you have to do something new in the original position and the rabbit corkscrew September To do this, use any type of instrument that comes in handy, fit into the case and can be used to push the connectors on the back. Once you succeed in diameter, with a kitchen set, the corkscrew is ready for normal use.
How to fix the rabbit corkscrew
No comments:
Post a Comment